Wall mounted jib crane, easy to install and easy to control. It is widely used in the workshop. It could be mounted on the column which exists in the workshop and make it as the supporting column, it could save your cost. This kind of jib crane does not occupy the ground area and has the simple frame
Feature
1.Optimization design, light structure;
2.It has the advantage of novel structure, reasonable, simple, convenient operation and use, flexible rotating and movement, light net weight, it’s the efficient energy-saving materials lifting machine.
3. Flat cable feeding line with sliding supports
4. Finish: Bright yellow polyurethane topcoat RAL 1028 with 10 years service life.
5. Slewing is effected on a plain bearing with a self-lubricating ring
6. Large height adjustment
7. Brackets are secured by H.R.M. 24 bolts, class 10.9.
8. Tightening must be achieved by using torque wrench
tightening torque: 92kgm.
9. Strong profile connection
10. Light construction - low loading for the building
11. Easy to install
Specification
Feature
1.Optimization design, light structure;
2.It has the advantage of novel structure, reasonable, simple, convenient operation and use, flexible rotating and movement, light net weight, it’s the efficient energy-saving materials lifting machine.
3. Flat cable feeding line with sliding supports
4. Finish: Bright yellow polyurethane topcoat RAL 1028 with 10 years service life.
5. Slewing is effected on a plain bearing with a self-lubricating ring
6. Large height adjustment
7. Brackets are secured by H.R.M. 24 bolts, class 10.9.
8. Tightening must be achieved by using torque wrench
tightening torque: 92kgm.
9. Strong profile connection
10. Light construction - low loading for the building
11. Easy to install
Specification
| Type | Unit | BQ0.5 | BQ1 | BQ2 | BQ3 | BQ5 |
| Ioad capacity | t | 0.5 | 1 | 2 | 3 | 5 |
| crane travelling speed | m/min | 20 | 20 | 20 | 20 | 20 |
| Lifting speed | m/min | 8 | 8 | 8 | 8 | 8 |
| Hoist travelling speed | m/min | 20 | 20 | 20 | 20 | 20 |
| Work class |
A3 |
|||||
| Power supply |
220~440V,50/60HZ,3phase or customized |
|||||
| Lifting height | m | Customized | ||||
| Jib length | m | Customized | ||||
| Control mode | Pendent pushbutton control or remote control | |||||
